|
|
 |
Rollok Custom Rolling Tambour Doors - Price List
Shelving Systems Security Door
 Made of double-walled aluminum slats, Rollok doors are lightweight and torsion-spring balanced for easy operation. During office hours, the doors roll up and out-of-sight; yet while closed and locked, they provide a solid wall to prevent intrusion.
|
Email us for custom Clear Slat Tambour Door.
|
 |
The following figures are pricing guidelines for Rollok doors on medical shelving.
Final Pricing will be based on final dimensions and configuration.
Custom Size Available.
| Width (in) |
Height (in) |
Approximated Price |
| 36 |
76-1/4 |
$ 1,020.00 |
| 42 |
76-1/4 |
$ 1,086.00 |
| 48 |
76-1/4 |
$ 1,154.00 |
| 72 |
76-1/4 |
$ 1,438.00 |
| 96 |
76-1/4 |
$ 1,712.00 |
| 108 |
76-1/4 |
$ 1,852.00 |
| 114 |
76-1/4 |
$ 1,922.00 |
| 36 |
88-1/4 |
$ 1,060.00 |
| 42 |
88-1/4 |
$ 1,132.00 |
| 48 |
88-1/4 |
$ 1,206.00 |
| 72 |
88-1/4 |
$ 1,508.00 |
| 96 |
88-1/4 |
$ 1,798.00 |
| 108 |
88-1/4 |
$ 1,948.00 |
| 114 |
88-1/4 |
2,022.00 |
Rolling Door Specifications
Our foam filled slats are made of 100% CFC-free material. Water is used as propellant, NO PROPELLANT SUCH AS PENTANE OR BUTANE ARE USED. The powder-coated surface is made of polyester and enameled in a special stove with 200° C.
|
Slat profile: |
- Material: Roll formed aluminum
- Slat Profile, made of 3005 H27 aluminum alloy per ASTM aluminum standards which is coil coated with a high quality polyester paint on the outside to insure durability and a poly primer on the inside to provide an adhesive surface for the polyurethane foam core. The foam is injected during the forming process, adding structural composition as well as insulating qualities.
- Interlocking slats, continuous for the entire door width, side-locks at the ends of alternating slats.
|
Housing/Hood Material:
Aluminum, Alloy 3005, minimum 0.032" thick per ASTM aluminum standards, which is coil coated.
|
Guide Rails: |
- Material: Extruded aluminum alloy of 6063-T5.
- Finish: Match slat finish.
- Dimensions: 2.125" x 0.875".
- Thickness: Corners are 0.015" radius, and typical wall thickness is 0.062".
|
Bottom Slat-for mounting locking mechanism |
- Material: Extruded aluminum alloy of 6063-T5.
- Finish: Match slat finish.
- Dimensions: 3.039" x 0.328".
- Thickness: Corners are 0.015" radius, and typical wall thickness is 0.055".
|
|
|
